0755-28286748
超低功耗6軸陀螺儀傳感器
The ICM-42670-P is a 6-axis MEMS MotionTracking device that combines a 3?axis gyroscope and a 3?axis accelerometer. This device is targeted at Consumer and IoT applications that require ultra-low power to drive longer battery lives. This sensor provides industry’s lowest power consumption for both 6?axis and accelerometer only operating modes. It also comes with a list of embedded motion features and interrupts to further reduce system power consumption.
The ICM-42670-P combines a 3?axis gyroscope and a 3?axis accelerometer in a small 2.5 × 3 × 0.76 mm (14?pin LGA) package. It also features up to a 2K Byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low?power mode.
It has a configurable host interface that supports I3C?, I2C, and SPI serial communication, and two programmable interrupts with ultra low?power wake?on?motion support to minimize system power consumption. Other industry?leading features include on?chip APEX Motion Processing engine for gesture recognition, and pedometer, along with programmable digital filters, and an embedded temperature sensor.
This product also comes with smaller Z?height of 0.76 mm, making it suitable for form factor sensitive applications. Consumer products and systems with space constraints can leverage this 20% size reduction for their applications.
The ultra-low power consumption, small size, and on?chip motion features makes it a perfect fit for applications such as wearables, hearables, AR glasses, smart home appliances, and TV remotes.
In addition, the ICM?42670?P supports the lowest gyro and accel sensor noise in this IMU class, and has the highest stability against temperature, shock (up to 20,000g) or SMT/bend induced offset as well as immunity against out?of?band vibration induced noise.
| 型號 | DataSheet | Dimension (mm) | Description |
|---|
主芯片和MCU
模擬和接口芯片
MEMS傳感器
網通WIFI芯片